Things you need to know before renovating your bathroom

Although bathrooms are the smallest rooms in the house so fully renovating the bathroom is considered as a small project. In some cases, removing what’s there may involve smashing up plenty of cast iron, concrete and dusty plaster. Rebuilding and redoing the kitchen require almost the same quantity of functional and aesthetic decision such as a host of construction tradesman, tiles to plumbers to electricians.

Here are some tricks to consider before remodeling your bathroom to ensure that the renovated bathroom stands the test of time.

Plumbing

No renovation is complete without repairing or remodeling fixtures and features. Residential plumbing makes use of 1 ½ inch pipes for drains. It is less likely to clog if the drain is large. You should repair or update your shower doors and mirrors. Very easily you can change the look of your bathroom by changing the hardware for your room shower, door handles and drawer pulls. If you have enough money in your hand you can easily change the whole look of your kitchen. The cost of updating 1 ½ inch to 2 inch is nearly negligible and you should consider increasing the drain in your shower to 2 inches unless your framing allows for it. It is important to consider the fact that your water supply lines don’t get routed through an exterior wall if you live in a region where temperatures drop below freezing point during the winter.

Reinventing the layout

Try to keep the new plumbing fixtures in the same location as the old ones as this will help you to cut off the cost. As long as you have a crawlspace or basement access underneath it is not possible to save money on the first floor. Whereas in a second-floor bathroom if you put back the new fixture in the same old place then you could save $200 to $500 as you won’t need to incur the cost of running new supply and drain pipes.

Do check some videos on bathroom remodeling here.                                                                                                                                                                                                                                                                                                                                                                    

Lighting

To brighten up the room use recessed light fixtures throughout the room. Fix one or two of these in your shower with the proper shower trim. By adjusting a dimmer switch you can adjust the mood in your kitchen according to your need and requirement. You should also consider the fact that whether you want functional or aesthetic lighting and how you will be using the mirror in your bathroom.                                                                                      

Warming up of floors

In order to avoid cold tile floor try to add a radiant heater which is nothing but simply an electric heating element that is put by the tile installer underneath the finished floor while fixing the tiles. Installation of this heater adds $500 to $1,000 to your project depending on the room but this will make your new bathroom a peaceful and comfortable place.

Try having a window in the shower

If done properly this is a great feature. Firstly choose a glass panel for privacy and try choosing one that can be opened for fresh air. In order to make the area watertight ensure that there are stone jambs along the entire installation. Also, keep in mind that that the sill is away for proper drainage and get sloped down. As the screen is located on the outside of the window so it’s better to choose a tilt-and-turn window in a shower. The handles should be of plastic so that they don’t rust and even if they are tilted open, a window will provide full privacy.                                                                                                                                     

Choose porcelain instead of stone

Though you would definitely love to choose all sorts of natural stone tile options for your shower-enclosure walls and bathrooms but, in order to save about $500 to $1,500 you can go with porcelain tile for an average bathroom. By opting for a porcelain tile you will be able to get a variety of textures and colors as that provided by real stones. These tiles are almost indestructible and your tile floor will neither be at risk of discoloring nor will your floors require sealing.

Shower floors and sills

While choosing a windowsill to try to choose a material that is solid like that of quartz or stone. Water can sit on the ground if you tile tour shower curb and eventually it will seep through to the framing. Unless textured properly larger tiles are more difficult to slope properly. Smaller tiles are typically the norm for shower floors and offer more traction whether textured or not.

Worthwhile spending for a master bathroom

In order to have a master bathroom that feels relaxing and luxurious follow a few points. Install a separate soaking tub and walk-in shower as it makes both showering and bathing more enjoyable and efficient than the standard combo tub-and-shower setup. Allowing the overall bathroom to be a truly shared place, adding a toilet room creates privacy where it is needed.

Handicraftglobal

Leave a Reply

Your email address will not be published. Required fields are marked *